#Microstrip line cst microwave studio Patch#
#Microstrip line cst microwave studio free#

#Microstrip line cst microwave studio Patch#

In this paper we also observed and analyzed the radiation pattern of far field region, gain, radiation efficiency and total efficiency for different dielectric materials. In this paper, we design and implementation of 1x1 microstrip patch antenna array of giv.

Also VSWR is found 1.74 which is desirable. For FR4 the return loss, S 11 isobtained-11.4 dB at 2.4 GHz, this indicates the return loss is much lower comparing to the other dielectric materials used in this research. The main objective of this paper is to design and observe the performance of the designed microstrip patch antenna using different dielectric materials. This research paper represents the effort of designing and performance analysis of microstrip patch antenna for Wi-Fi communication system. Microstrip patch antenna is designed for Wi-Fi communication which operates using 2.4 GHz frequency band.

Two relevant books were found: Design of Non-planar Microstrip Antennas and Transmis-sion Lines 4 and the recent publication Conformal Array Antenna Theory and Design 5. 1.2 LiteratureReview Bibliography in the eld of conformal antennas is still limited. Microstrip patch antennas has low weight and low profile, conformability, easy and cheap fabrication costing, that's why it has been widely used in a various useful applications now a days. Computer Simulation Technology (CST) Microwave Studio suite.

#Microstrip line cst microwave studio free#

Wires provide less free space and non-mobility, thus indoor wireless communication system takes interest. Wireless communication and networking system has become an important area for research in academic and industrial institutes. Wireless communications has become very popular now-a-days. The last chapter brings in the simulations of the microstrip lines. We will also describe the coupled mode formulation and the even- and odd-mode method. This means that the vacuum dryer design performs well at whatever level the material container is filled at. coupled microstrip lines and also some of the main techniques for analyzing coupled lines are draft. However, all the models yielded results that are not very far from the other models. Illustration of 1x4 microstrip patch array antenna By using the design parameters, 3D directivity pattern of the array is predicted by using CST Microwave Studio as seen in Fig. The distances between the patches are 0.75. For varying material volumes (50%, 70%, & 90%), the results show that overall, the 50% yielded the highest energy field, energy distribution, and absorption rate. o are impedance values of any microstrip lines that are connected to each other with the QWT. Using CST Microwave Studio simulation software, it is seen that the best design for a 30-L MV chamber operating at 2.45 GHz is a cylindrical chamber with a radius of 202mm, length of 400mm, and with 2 perpendicular feeders located near the ends of the chamber. Primarily, this study concentrates in further optimizing dimension of the chamber, orientation of the microwave generators, material volumes, and control system parameters. Development of LNAs in Fin-line and Microstrip-Line technique for the Ku-Band. This study presents an optimized design of a microwave vacuum dryer (MVD) for rice bran stabilization addressing the problem with uneven heat distribution leading to scorching. For this purpose I have used several CADs like CST-Microwave Studio.